Yamaha RX-Z7 User Manual

Page 41

Optimizing the speaker setting for your listening room

PRE

ARA

ION

The results of the measurement that are the causes of the
warning message(s) appear in yellow or pink.

• “–––” appears when no speaker is connected to the

corresponding speaker channel or this unit does not measure the
corresponding speaker channel yet.

• If you change speakers, speaker positions, or the layout of your

listening environment, run the automatic setup again to
recalibrate your system.

• The distances displayed in the “Distance” results may be longer

than the actual distance depending on the characteristics of your
subwoofer or external amplifiers if you connect them.

• In the “Equalizing” results, different values may be set for the

same band to provide finer adjustments.

To reload the displayed parameter, press
9

ENTER.

Press I

MENU to turn off the GUI menu.

• You can also set the parametric equalizer type with “PEQ

Select” (page 96).

• You can set the phase of the connected subwoofer with “Phase”

Notes