Loading the system settings – Yamaha RX-Z7 User Manual
Page 109
109
En
Saving and recalling the system settings (System Memory)
AD
V
ANCED
OPERA
T
ION
3
Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4
Press 9k / n / l / h to select a character or
function and then press 9
ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5
Press 9k / n / l / h to select “SAVE” and
then press 9
ENTER.
y
• To reset the name, select “RESET” and then press 9ENTER.
• To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6
Press I
MENU to turn off the GUI menu.
If you change the language setting (page 107) or 132), names of
the memory settings will be automatically reset.
■ Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2, Zone 3 and Zone 4 parameters
For zone 4, only the input source setting is saved.
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
■ Loading by the 7SYSTEM MEMORY
buttons
You can recall the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding 7SYSTEM
MEMORY buttons.
Note
Group
Parameters
Page
Input/HDMI
Out
Audio Select
Decoder Mode
Input source
HDMI OUT SEL
Audio
Stereo/Surround
PURE DIRECT on/off
EXTD SUR. setting
Adaptive DRC
Adaptive DSP Level
LFE Level
Dynamic Range
Tone Control
Pure Direct
CINEMA DSP 3D mode on/off
Volume
Volume level
SP Config
Parametric EQ
Configuration
Distance
Level
Information (Auto Setup)
Setup Menu (Auto Setup)
Video/
Display Set
Analog ` Analog
Analog ` HDMI
HDMI ` HDMI
Processing
Short Message
Playback Screen
Position
Wall Paper
Others
Lipsync
Front Panel Display
Audio Output
Parameter
Descriptions
Page
Input
Input source
Volume
Volume level
Tone Control
Tone control settings
Note
Loading the system settings
Note
Group
Parameters
Page