beautypg.com

Telnet configuration and capabilities – ZyXEL Communications Prestige 128L User Manual

Page 97

background image

Telnet Configuration and Capabilities 85

12

Telnet Configuration and
Capabilities

About Telnet Configuration

When you first configure your Prestige, it must be done via a computer
connected to the RS-232 port. However, once your Prestige has been
initially configured, you can use telnet to configure the device
remotely as shown below:

Figure 12-1 Telnet Configuration on a TCP/IP Network

In order to configure your Prestige in this way, you need to have
assigned an IP Address to your device and have connected it to your
network. See Chapter 3 for more information on assigning an IP
Address. Once this is configured, any station on the LAN or remote
network that has TCP/IP installed can use telnet remote