beautypg.com

ZyXEL Communications Prestige 128L User Manual

Page 62

background image

50 TCP/IP Configuration

or a Remote Node, a static route is implicitly created by your Prestige.
An example is given below. In the example, stations on the
204.5.1.0/24 subnetwork can access the remote stations using the static
route. The route will have a destination of 204.5.1.64/26 with the
gateway address being that of the Remote Node (204.5.1.150).

Figure 6-4 Static Routing Example

Note that in normal circumstances, your Prestige will have adequate
routing information after you configure the Internet access and Remote
Nodes; you do not need to configure additional static routes. You will
need to configure static routes only for unusual cases, e.g., subnetting.
To create additional static routes for IP, use Menu 12, Static Route
Setup as shown below: