Xantrex Technology PROwatt 600 - Manual (Page 10)

Precautions For Using Rechargeable Appliances
ix
Precautions For Using Rechargeable
Appliances
Most battery-operated equipment uses a separate charger or
transformer that is plugged into an AC receptacle and
produces a low voltage output. If the label on the AC adapter
or charger states that the adapter or charger produces a low
voltage AC or DC output (less than 30 volts), the PROwatt
can power this charger or adapter safely.
Some rechargers for small nickel-cadmium batteries can be
damaged if connected to the PROwatt 600 Inverter. Do not
use the following with the PROwatt 600 Inverter:
• Small battery-operated appliances like flashlights, razors,
and night lights that can be plugged directly into an AC
receptacle to recharge
• Chargers for battery packs used in hand power tools.
These chargers display a warning label stating that
dangerous voltages are present at the battery terminals
AC Wiring Warning
Do not connect the PROwatt 600 Inverter to AC distribution
wiring.
The PROwatt is designed to be connected directly to standard
electrical and electronic equipment. Do not connect it to
household or recreational vehicle AC distribution wiring. Do
not connect it to any AC load circuit in which the neutral
conductor is connected to ground (earth) or to the negative of
the DC (battery) source. Doing so will destroy the unit.