Xerox 721P85600 - Manual (Page 41)

PREINSTALLATION
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 3-11
Power cables DocuPrint 96/DocuPrint 96MX LPS power cable lengths are as
follows:
• System Controller: 15 feet/4.5 m
• Printer: 5 feet/6 feet/1.8 m/4.5 m (60 Hz)
17 feet/5.1m (50 Hz, no plug)
•
Keyboard/display: 15 feet/4.5 m
• Peripheral cabinet option: 15 feet/4.5 m.
Note: Cable length loss must be factored in if equipment is
installed in a raised-floor environment. You should also consider that
part of a cable’s length is routed inside the equipment to connect with
interior power or data receptacles.
Cable locations
To run the cables beneath the flooring effectively, you need to know
where the cables enter and exit the printer and the system controller.
Figure 3-10 shows those locations (marked with an X).
Figure 3-10. Cable enter/exit locations (top view)