Xerox DocuColor 2045 - Manual (Page 74)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E 1 – 5 2
NOTE: The button for Tray 4 does not appear unless you have this optional
accessory connected to your DocuColor 2060/2045.
7
Use the up or down arrow buttons to enter the amount of adjustment for either
edge or both edges.
KEY POINT: Remember that the Lead Edge Registration adjustment is the
feeding edge, or Y direction. The Side Edge Registration adjustment is the front
to back, or X, direction.
KEY POINT: If the reference point on side two is closer to the edge of the
paper compared to the reference point on side one, enter a plus figure. If the
reference point on side two is further from the edge of the paper compared to
side one, enter a minus figure.
KEY POINT: EXAMPLE: If the measurement is 1.2mm closer to the edge of
the paper, enter +1.2mm.