Xerox DocuColor 2045 - Manual (Page 55)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E
T
O
OL
S
M
OD
E
1–33
Job Complete
The Job Complete feature determines when the digital press returns to the
system default settings after a scanned job with programmed settings is
complete. If a user has completed a job and failed to return the system settings
to their default values by pressing the Clear All button on the Control Panel, the
machine automatically restore thes default settings after the amount of time set
in the Job Complete screen.
1
Touch the Job Complete button on the System Timers screen. The Job Complete
screen appears.
Figure 27. Job Complete screen
2
Use the up or down arrow buttons to change the time. The range available is 1 to
10 minutes.
To use the system default time of 2 minutes, touch the System Default button.
3
Touch the Enter button on the screen to enter the new time into the system.
4
Touch the Close button to return to the Machine Defaults 1 screen, or select
another timer to change.