Zanussi ZKG5020 - Manual (Page 26)

Installation
MODEL RECOGNITION TABLE
MODEL NAME COLOR GAS TYPE 1) HOB FSD 2)
ZKG5020WN1 WHITE NG NO 3)
ZKG5020WFN WHITE NG YES
ZKG5020SN1 SILVER NG YES
ZKG5020WL1 WHITE LPG YES
ZKG5020SL1 SILVER LPG YES
ZKG5020BL1 BROWN LPG YES
1) For more information, refer to Technical Data on page 24.
2) For more information, refer to FSD warning clause on page 11.
3) This appliance is not suitable for installation in flats or other multi occupancy dwellings as defined in clause 8.2.1 of IGE/G/
5.
Safety requirements
• Natural Gas / LPG versions of this appliance
are available.
• Check that this model is suitable for the type
of supply available. This appliance must be
installed and/or serviced by a competent
person in accordance with the Gas Safety
(Installation and Use) Regulations Current
Editions and the I.E.E. Wiring Regulations.
• Detailed recommendations are contained in
the following British Standard Codes of Prac-
tice - BS.6172, BS.5440: Part 2 and B.S.
6891. All British Standards must be 'Current
Editions'.
• For appliances installed in the Republic of
Ireland please refer to NSAI – Domestic Gas
Installation IS813 Current Editions and the
ETCI Rules for Electrical Installations. In the
Republic of Ireland a signed Declaration of
Conformity is issued by the installer (IS813
Current Editions Annex D.1).
WARNING!
This appliance must be installed by a qualified
electrician / competent person (CORGI Regis-
tered). Safety may be impaired if installation is
not carried out in accordance with these in-
structions. Do not alter the electrical circuitry of
this appliance.
Provision for ventilation
• This appliance is not connected to a com-
bustion products evacuation device. It
should be installed and connected in ac-
cordance with the current installation regu-
lations. Particular attention should be given
to the relevant requirements regarding ven-
tilation.
26