Xerox C15 - Manual (Page 45)

Printer Buttons
Chapter 3: Printing ❖ 3-9
Flashing rapidly Check for the following conditions and perform the appropriate corrective action:
• If the printer is out of paper, load paper and press the RESUME button.
• If paper is jammed, clear the jam and press the RESUME button.
• If a print cartridge is installed in the incorrect carriage or not installed,
replace or reposition the cartridge. The printer will then initialize and the
Indicator Light will remain lit.
If none of these actions resolve the problem, Power Off the printer and
disconnect it from the electrical power supply.
• Make sure that the print cartridge carriage and feeder paths are not
obstructed.
• Then reconnect and Power On the printer.
If the Indicator Light continues to flash rapidly, disconnect the printer and contact
the Xerox Customer Support Center.
Table 3.4 Indicator light states (continued)
Status of light Condition/Corrective Action
Table 3.4 Page 2 of 2