Xerox C15 - Manual (Page 38)

Printer Driver Settings
3-2 ❖ DocuPrint C15 Color Inkjet Printer User Guide
Printer Driver Settings
Always make sure that you select the Paper source, Paper
type, and Paper size features in your printer driver that
correspond to the printing media you intend to use. This
is particularly important for color printing.
A color calibration in the driver is set specifically for each
of the different types of media handled, so an incorrect
setting will result in less satisfactory output.
Driver Features The DocuPrint C15 driver supports the features listed in
Table 3.1.
Table 3.1 DocuPrint C15 Driver features
Feature Description and Values
Copies Specifies the number of copies to be printed.
Orientation Defines the way the image is printed on paper.
• Portrait: For most paper types, Portrait is tall.
• Landscape: For most paper types, Landscape is wide.
• Mirror Effect: Is applied automatically if you select Transfer in the Paper type list.
Output Specifies the order in which the pages of a job exit from the printer.
• Collate: Prints the job beginning with the first page. There are two choices:
- 1,1; 2,2; 3,3; prints all the copies of each page in a set beginning with the first
page. This is the default.
- 1,2,3; 1,2,3; prints all the pages of each set beginning with the first page before
the next set of copies is generated.
• Reverse page order: Prints the set beginning with the last page (last-to-first
printing).
Table 3.1 Page 1 of 3