ZyXEL Communications omni.net LCD series - Manual (Page 7)

omni.net LCD series Quick Start Guide
1-3
Front Panel LEDs
LED Function Active Description
PWR Power On The PWR LED lights up when the power is turned
ON.
LNK Link On
Blinking
The LNK LED lights up when a link with the local
ISDN switch is active.
This LED blinks when attempting to make a
connection.
B1 B1 Channel On The B1 Channel connection LED lights up when
the B1 Channel is established.
B2 B2 Channel On The B2 Channel connection LED lights up when
the B2 Channel is established.
AA Auto-Answer On
Blinking
The AA LED lights up when your TA is ready to
automatically answer your calls.
This LED blinks when your ISDN TA rings.
DTR Data Terminal
Ready On The DTR LED is on when the device connected to
the TA/Modem has established a link and is ready
for communication.
TX Transmit Data On When the TX LED is on your DTE/Computer
transmits data to the DTE port.
RX Receive Data On When the RX LED is on your DTE/Computer
receives data from the DTE port.
DTE (Data Terminal Equipment) is the source or destination of data in a
communication connection that is connected to your TA or modem.
Control Panel
The four arrow keys allow intuitive menu-tree operation and the LCD panel displays the status of
your omni.net LCD PLUS/LCD+M/LCD ISDN terminal adapter.