beautypg.com

Install inf file – ZyXEL Communications omni.net LCD series User Manual

Page 28

background image

omni.net LCD series Quick Start Guide

3-2

Install INF File

Please note that the omni.net LCD and omni.net M/LCD both lack a USB interface.

Please be aware that these products must be installed via a serial port (RS-232)

interface. The procedure for this installation is listed in the previous section.

If your computer supports Plug & Play, be sure your omni.net LCD+M/LCD is on before starting
your computer. If you are using a non-PnP protocol, then follow the steps below to perform the
installation:

Step 1. Click Start, Settings, Control Panel and then double-click on the Modems icon. Click

on the “Add…” button.

Step 2. In the screen below click the Don't detect my modem; I will select it from a list option

box. Click Next > to continue.

Check this

option button

by clicking

here.

Click Next >.