ZyXEL Communications omni.net LCD series - Manual (Page 46)

omni.net LCD series Quick Start Guide
5-6
Create a PPP Connection
At this point, you very close to accessing the Internet. Follow the instructions below to create a
new Dial-up Connection.
Step 1. Double-click on the My Computer icon, double-click on the Dial-up Network icon and
then double-click on Add New Dial-up Connection.
Step 2. Give a name to this Dial-up Connection, for example, “omni.net LCD TA” for
identification purposes. Double-click on your new TA icon as the device to connect to the
Internet and then click Next.
Step 3. Enter your ISP's phone number and then click Next.
Step 4. Click Finish. Click on your recently created icon to connect to the Internet.
Step 5. Congratulations, you have completed PPP setup and can now access the Internet using
your new TA! To test your connection and find out more about ZyXEL’s exciting products
visit www.zyxel.com .
Click the COM Port
that is connected to
your TA. Select one
COM Port only.
Click OK.