beautypg.com

Set up tcp/ip for ppp – ZyXEL Communications omni.net LCD series User Manual

Page 51

background image

omni.net LCD series Quick Start Guide

6-5

Set up TCP/IP for PPP

Step 1.

Choose Control Panels from Apple Menu and open the TCP/IP control panel. You should

see the TCP/IP window shown below:

Step 2.

Choose PPP from the “Connect via” pop-up menu.

Step 3.

Choose your configuration method from the “Configure” pop-up menu. For example, Using

PPP Server.

Step 4.

The most common selection is Using PPP Server which causes OT/PPP to request IP

address from the server when it connects.

Step 5.

Enter name server addresses.

Step 6.

Close and save.

Select PPP.

Select your

configuration

method.

Enter your

name server

address(es).

Close and

save.

See also other documents in the category ZyXEL Communications Hardware: