ZyXEL Communications P-660RU-T V2 - Manual (Page 97)

Chapter 12 Network Address Translation (NAT) Screens
P-660RU-T v2 User’s Guide
97
12.5 Configuring SUA Server
"
If you do not assign an IP address in Server Set 1 (default server), the ZyXEL
Device discards all packets received for ports that are not specified here or in
the remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to
Table 21 on page 95 for port numbers commonly used for particular services.
Figure 46 Edit SUA/NAT Server Set
Edit Details Click this link to go to the NAT - Address Mapping Rules screen.
Apply Click Apply to save your configuration.
Table 22 NAT Mode (continued)
LABEL DESCRIPTION