5 dhcp setup, 6 internet access wizard setup: third screen – ZyXEL Communications P-660RU-T V2 User Manual
Page 45
Chapter 3 Wizard Setup
P-660RU-T v2 User’s Guide
45
3.2.5 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL
Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device
provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must
have another DHCP server on your LAN, or else the computer must be manually configured.
3.2.5.1 IP Pool Setup
The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP clients (DHCP
Pool). See the product specifications in the appendices. Do not assign static IP addresses from
the DHCP pool to your LAN computers.
3.2.6 Internet Access Wizard Setup: Third Screen
Verify the settings in the screen shown next.
Figure 11 Internet Access Wizard Setup: Third Screen
If you want to change your ZyXEL Device LAN settings, click Change LAN Configuration
to display the screen shown next. Otherwise, click Log on to the Internet! to save the
configuration. Skip to