Xerox 3119 User Manual

Page 14

Getting started

2.4

Pay attention to the paper limit mark on both inside walls

of the paper input tray. Paper overloading may cause

paper jams.

Insert and slide the paper input tray back into the

machine.

OTE

After you load paper, you need to set up your machine

for the paper type and size you loaded. See page 3.6 for

copying, or the Software Section for PC-printing. The

settings made from the printer driver override the settings on

the control panel.

Changing the size of the paper in the paper

input tray

To load longer sizes of paper, such as Legal-sized paper, you

need to adjust the paper guides to extend the paper input tray.

After pressing and unlatching the guide lock, slide the

paper length guide out completely to extend the paper

input tray to its full length.

After inserting paper into the paper input tray, squeeze the

front paper length guide and slide it until it lightly touches

the end of the paper stack.

For paper smaller than Letter size, adjust the front paper

length guide so that it lightly touches the paper stack.