Yamaha CLP-230 - Manual (Page 51)

Detailed Settings – [FUNCTION]
CLP-240/230 Owner’s Manual
ENGLISH
51
This section provides a variety of other func-
tions, including letting you assign the opera-
tion of the left pedal to one of several modes,
and allowing you to select specific song chan-
nels for playback.
1. Engage the Function mode and select
(CLP-240)/ (CLP-230).
2. Press the [+/YES] button to engage the other
functions’ sub-mode, then use the [TEMPO/
FUNCTION# ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the val-
ues.
Sub-mode
F5.1
(CLP-240)
/F4.1
(CLP-230)
Left Pedal Mode
Setting range:
1. Soft Pedal
The soft pedal reduces the volume and slightly
changes the timbre of notes played while the pedal is
pressed. The soft pedal will not affect notes that are
already playing.
2. Song Play/Pause
This mode allows you to start or pause song playback.
In this mode, the Left Pedal functions in the same
manner as the
SONG [PLAY/PAUSE] button on the
panel.
3. Variation (CLP-240)
This mode enables you to switch the Voice’s variation
on or off. In this mode, the left pedal functions in the
same manner as the
[VARIATION] button on the
panel.
Normal setting: 1(Soft Pedal)
F5.2 (CLP-240) /F4.2 (CLP-230)
Soft Pedal Effect Depth
Setting range: 1 – 5
Normal setting: 3
This function sets the depth of the soft pedal effect.
F5.3 (CLP-240)
Sustain Sample Depth
Setting range: 0 – 20
Normal setting: 12
The
GRAND PIANO 1 voice features special “Sustain
Samples” that recreate the unique resonance of an acous-
tic grand piano’s soundboard and strings when the
damper pedal is pressed. This function lets you adjust the
depth of this effect.
F5.4
(CLP-240)
Keyoff Sample Volume
Setting range: 0 – 20
Normal setting: 10
You can adjust the volume of the keyoff sound (the sub-
tle sound produced when the keys are released) for voices
[GRAND PIANO1] , [HARPSICHORD] , [E.CLAVICHORD]
(including their variations).
F5.5
(CLP-240)
/F4.3
(CLP-230)
Song Channel Selection
Setting range: ALL, 1&2
Normal setting: ALL
The setting here only affects DOC (Disk Orchestra Col-
lection) songs, Disklavier Piano Soft songs, and non-
protected External songs. You can specify which song
channels will play back on this instrument. When “ALL”
is selected, channels 1-16 will be played back. When
“1&2” is selected, only channels 1 and 2 will be played
back, while channels 3-16 will be transmitted via MIDI.
F5.
(CLP-240)
/ F4.
(CLP-230)
Other Functions