Setting the volume, Using headphones, Using the speaker switch – Yamaha CLP-230 User Manual
Page 12: English 12, Using the headphone hanger
Before Using the Clavinova
CLP-240/230
Owner’s Manual
ENGLISH
12
Setting the Volume
Initially set the
[MASTER VOLUME]
slider about halfway between the “MIN” and “MAX” settings. Then, when you start
playing, re-adjust the
[MASTER VOLUME]
slider to the most comfortable listening level.
CAUTION
Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged.
Using Headphones
Connect a pair of headphones to one of the
[PHONES]
jacks.
Two
[PHONES]
jacks are provided.
You can connect two sets of standard stereo head-
phones. (If you are using only one pair of headphones,
you can plug them into either jack.)
Using the Headphone Hanger
A headphone hanger is included in the CLP-240/230
package so that you can hang the headphones on the
Clavinova. Install the headphone hanger using included
two screws (4
×
10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on
the hanger. Otherwise, the Clavinova or the hanger
may be damaged.
Using the Speaker Switch
This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of
headphones is not connected.
ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.
TERMINOLOGY
MASTER VOLUME:
The volume level of the entire keyboard sound
NOTE
You can also adjust the
[PHONES]
output level and the AUX IN input level using the
[MASTER VOLUME]
slider.
MASTER VOLUME
MIN
MAX
The level decreases.
The level increases.
PHONES
SPEAKER
NORMAL
OFF
ON
HP. SW
standard
stereo
phone plug
bottom surface
PHONES
SPEAKER
NORMAL
OFF
ON
HP. SW