Yamaha CLP-230 - Manual (Page 22)

Selecting & Playing Voices
CLP-240/230 Owner’s Manual
ENGLISH
22
Pressing the [REVERB] button repeatedly toggles the reverb on and off.
The indicators light in sequence each time the [REVERB] button is pressed. No effect is
produced when all indicators are off.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the [–/NO] [+/YES] buttons
while holding the [REVERB] button. The depth range is from 0 through 20. The current
depth setting appears on the LED display while the [REVERB] button is held.
[EFFECT]
The [EFFECT] button allows you to select an effect to give your sound greater depth and
animation.
OFF: When no effect is selected, no EFFECT indicator is lit.
CHORUS: A shimmering, broadening effect
PHASER: Adds a sweeping effect to the sound.
TREMOLO: Tremolo effect
ROTARY SP: Adds the vibrato effect of a rotary speaker.
To select an effect type, press the [EFFECT] button a few times until the indicator corre-
sponding to the desired type lights (the indicators light in sequence each time you press
the
[EFFECT] button). No effect is produced when all indicators are off.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the [–/NO] and [+/YES]
buttons while holding the [EFFECT] button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[EFFECT] button is held.
[DDE] (CLP-240)
The DDE (Dynamic Damper Effect) lets you hear a simulation of the sustain sound of
the damper pedal on a grand piano, as you press the damper pedal and play the key-
board. This effect is applied to the entire sound of the instrument.
Pressing the [DDE] button repeatedly toggles the DDE on and off.
Adjusting DDE Depth
You can adjust the DDE depth by using the [–/NO] and [+/YES] buttons while holding
the [DDE] button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[DDE] button is held.
Procedure
NOTE
Releasing the [REVERB] button
changes the reverb type.
If you are changing the reverb
depth by holding the
[REVERB]
button, pressing the [REVERB]
button will not change the reverb
type.
NOTE
Depth 0: no effect
Depth 20: maximum reverb depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
The default effect type (including
OFF) and depth settings are dif-
ferent for each voice.
Procedure
NOTE
Releasing the [EFFECT] button
changes the effect type.
If you are changing the depth set-
tings by holding the
[EFFECT]
button, pressing the [EFFECT]
button will not change the effect
type.
NOTE
Depth 0: no effect
Depth 20: maximum effect depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
Normal setting = ON
NOTE
Depth 0: no effect
Depth 20: maximum DDE depth
Procedure