Yamaha CLP-230 - Manual (Page 11)

Before Using the Clavinova
CLP-240/230 Owner’s Manual
ENGLISH
11
Turning the Power On
1.Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC INLET on the Clavinova, and the other into a standard AC
outlet.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
CAUTION
Make sure your CLP-240/230 is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears
on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main
keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit
to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard!
Use only the AC power cord supplied with the CLP-240/230. If the supplied cord is lost or damaged and needs to be
replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the CLP-240/230 may be different depending on the country in which it is pur-
chased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.)
Do NOT modify the plug provided with the CLP-240/230. If the plug will not fit the outlet, have a proper outlet installed by a
qualified electrician.
2.Turn the power on.
Press the [POWER] switch.
• The display located in the center of the front panel and the power indicator located below the left end of the keyboard lights up.
When you’re ready to turn off the power, press the [POWER] switch again.
• The display and the power indicator turn off.
NOTE Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is
still on.
(bottom surface)
1-1 1-2
(The shape of plug differs
depending on locale.)
Normally indicates tempo.
Display
Power indicator
[POWER] switch