Recording to right/left, Procedure – Yamaha CLP-230 User Manual

Page 32

Recording Your Performance

CLP-240/230

Owner’s Manual

ENGLISH

Recording to RIGHT/LEFT

This lets you record the right and left parts separately. Since you can record the left part while play-
ing back the right, this is useful for recording both parts of a duet.

Make all the initial settings.

Same as step 1 in “Recording a performance quickly” on page 29.

Select a song to record.

Press the

[SONG SELECT]

button to light “USER” indicator on, then press the

[–/NO][+/YES]

buttons to select a song for recording.

CAUTION

To avoid erasing previously recorded song(s):
If the song contains data, the part indicator lights up green when you select a song.
Note that recording new data on this part will erase the existing data.

Engage Record Ready mode.

Press the

[REC]

button and press the

[RIGHT]/[LEFT]

button to engage Record

Ready mode. Recording does not actually start yet.

The amount of memory available for recording will be shown on the LED dis-
play in approximate kilobytes. The

SONG [PLAY/PAUSE]

indicator will flash at

the current METRONOME tempo setting.

Record Ready mode can be disengaged before recording by pressing the

[REC]

button again.

Start and stop recording.

Same as step 3-5 in “Recording a performance quickly” on page 30.

NOTE

Part button indications

Off:

Contains no data

On (green):

Contains data

On (red):

Part is enabled for

recording

NOTE

The amount of memory avail-
able for recording:

This value in kilobytes (a unit
used of measurement for data)
indicates how much space
remains available for recording on
the Clavinova. You can record up
to a maximum of about 11,000
notes on the CLP-240/230
depending on pedal usage and
other factors.

NOTE

If the metronome was on when
you started recording, you’ll be
able to keep time with the metro-
nome while recording, but the
metronome sound will not be
recorded.

NOTE

If you want to change the tempo,
time signature, reverb type, or
effect type when rerecording a
part or when recording to another
part, do so after entering Record
Ready mode.

NOTE

If you don’t want to hear the previ-
ously recorded part while you
record (for example, when you
want to record a song different
from what you recorded on the
previous part), press the play-
back part button before pressing
the

[REC]

button so that its indi-

cator is turned off.

NOTE

For more information on record-
ing, see page 33.

Procedure