Installing the print cartridge, Installing the print cartridge -4 – Xerox 3200MFP User Manual

Page 36

Text mode
Original mode

2 Getting Started

2-4

Xerox Phaser 3200MFP

Installing the Print Cartridge

Open the front door.

Remove the Print Cartridge
from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.

Thoroughly rock the cartridge 5 or 6
times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.

NOTE:

If toner gets on your clothing, wipe it

off with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.

CAUTION:

To prevent damage, do not expose the Print Cartridge to

light for more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes.

CAUTION:

Do not touch the green underside of the Print Cartridge. Use

the handle on the cartridge when lifting the cartridge to avoid touching
this area.