Yamaha AW4416 User Manual

Page 78

Chapter3—The user interface of the AW4416

— Operation Guide

3. Use the [PAN] control, EQ [Q]/[F]/[G] controls, and EQ [HIGH]–

EQ[LOW] keys at the right of the display to adjust the pan and EQ of the
channel that you selected by pressing its [SEL] key.

The controls and keys at the right of the display apply only to the channel that
was last-selected by its [SEL] key.

Tip!

If the VIEW, PAN, EQ, or DYN screens are shown in the display, you can control the
parameters of the channel selected by its [SEL] key.

4. To operate the faders, use the [HOME] key or [AUX 1]–[AUX 8] keys of

the FADER MODE section to select the fader mode (the parameters that
will be controlled by the faders).

The table on the following page shows the parameters controlled by each fader
will change.

PROFESSIONAL AUDIO WORKSTATION

LO-MID

HI-MID

PAN

LOW

LO-MID

HI-MID

HIGH

PAN

PROFESSIONAL AUDIO WORKSTATION

FADER MODE

EFF 1

EFF 2

AUX

HOME

FADER MODE

EFF 1

EFF 2

AUX

HOME