Yamaha AW4416 - Manual (Page 209)

Chapter12—Sampling pads
— Operation Guide
199
❍ FR. PAD (from pad)
Specify the copy source pad track.
❍ FR. START (from start)
❍ FR. END (from end)
Specify the beginning (FR. START) and end (FR. END) of the area that will be cop-
ied from the pad track specified by FR. PAD. The specified area will be selected
as a pattern.
❍ TO PAD
Select the copy destination pad track.
❍ TO START
Specify the location in the pad track selected by TO PAD at which the data will
be copied.
❍ TIMES (copy times)
Specify the number of times that the data will be copied. The pattern selected as
the copy source will be copied repeatedly.
Please note that the above operation does not copy the sample itself, but rather
the pad operation. This means that if the copy source and copy destination track
are different, a different sample will be played at the copy destination. Even if
you specify FR.START or FR.END during pad playback on the copy destination
track, the sample will always play back from the beginning for the specified
length on the copy destination track.
Copy source
pad track
(FR. PAD)
FR. START
TO START
COPY (TIMES= 3)
Copy destination
pad track
(TO PAD)
FR. END
Copy source
pad track
(FR. PAD)
Copy destination
pad track
(TO PAD)
FR. START
TO START
COPY
FR. END