Rollback function, Chapter6—transport/locate operations – Yamaha AW4416 User Manual
Page 125
Chapter6—Transport/locate operations
— Operation Guide
113
Rollback function
While the song is stopped or playing, you can press the [ROLL BACK] key of the
Locate section to move the current location back by a fixed length. This is conve-
nient when you are playing back, and come to a location that you wish to listen
to once again. The rollback time is set to 5 seconds by default, but can be
adjusted as desired.
1. With the song stopped, press the [UTILITY] key → [F3] key.
2. Move the cursor to the ROLLBACK TIME field, and use the [DATA/JOG]
dial to set the rollback time.
The rollback time can be adjusted in millisecond steps over a range of 0–5 sec-
onds (default setting is 5 seconds).
3. When the song is stopped or playing, press the [ROLL BACK] key.
If the [ROLL BACK] key is pressed while stopped, the current location will simply
move back by the length of the rollback time. If pressed while playing, playback
will resume immediately after the rollback occurs.
LAST REC
MARK SEARCH
LAST REC
5
4
IN
OUT
NO
A
B
REPEAT
RTZ
2
3
1
0
ROLL
BACK
CANCEL
SET
MARK
NUM
LOCATE
8
9
7
6
AUTO
PUNCH
Rollback time
setting