Zoom 3095 - Manual (Page 7)

7
5
Windows Vista: In the Windows needs to install driver software
for your USB modem message box, select Locate and
install . . .
Windows XP:
At the Found New Hardware Wizard dialog box,
select Install the software automatically, click Next, and follow
the prompts. You may see a message regarding Windows logo
testing. You can safely disregard the message and click
Continue Anyway.
Windows 2000:
You may see a dialog box stating that the Digital
Signature was not found. You can safely ignore this message
and click Yes.
6
Windows Vista:
In the User Account Control message box, click Continue.
Windows XP:
In the Completing the Found New Hardware Wizard dialog
box, click Finish.
A popup notification messsage tells you that your new hardware
is successfully installed.
7
Connect the supplied phone cord to the phone jack on the
modem. Plug the other end of the cord into the wall jack just as
you would a telephone.
Finally, confirm that the installation
was successful
1
Open Control Panel (Vista: select Printers and Other
Hardware) and double-click the Phone and Modem Options
icon.
2
Enter your Location information and then click the Modems
tab.
3
On the Modems tab, where you see that the USB modem is
installed, click the Properties button.
4
In the USB Modem Properties dialog box, click the Modem tab
and verify that the Maximum Port Speed is set to 115,200.