Zoom 3095 - Manual (Page 11)

11
• On the Modem Installation menu, click Main Menu, and
then Exit. (If the menu is minimized, click the USB modem
button on the taskbar to display the menu.)
• Remove the installation CD.
• Shut down your computer.
Next, connect the modem to your
computer
Your computer should be shut down.
1
Connect the cable end of the modem to any USB port on your
computer.
2
Turn your computer back on.
3 Windows will install the hardware on your system.
Windows 98 : A message appears indicating that Windows is
installing software for the V92 USB Faxmodem.
4
Connect the supplied phone cord to the phone jack on the
modem. Plug the other end of the cord into the wall jack just as
you would a telephone.
Finally, confirm a successful
installation
Your computer should be turned on.
1
Open Control Panel and double-click the Phone and Modem
Options or the Modems icon.
2 If prompted, enter your Location Information and then click the
Modems tab.
3
In the Modems Properties dialog box, click the entry for your
modem and then click Properties.
4
Click the Diagnostics or Modem tab and then click More info
or Query Modem. You will see a list of AT commands and
responses, indicating that your modem is properly connected.
5
Click OK or Close twice to exit.