beautypg.com

User instructions, Ash removal, Extended burning – Yeoman YM-CL5MF User Manual

Page 9: Over-firing, Chimney fire, General cleaning

background image

9

7. ASH REMOVAL

7.1 Multi-fuel stove

Riddle with the tool provided (see Diagram 9).

PR8728

Push/Pull to

operate

Open Door (see Diagram 10).

PR8729

—Using gloves carefully remove ashpan with the tool

provided. Heat can remain long after use.

—Place the ash into a Stovax Ash Caddy (Stovax Part No.

4227) or other suitable container.

—Remove ash at least once every week when burning

wood.

—Do not place hot ash in a container made from plastic or

any other combustible material.

8. ExTENDED BURNING

8.1 It is possible to get the appliance to burn for extended

periods of time. In order to do this:

De-ash prior to final refuelling.

Set air controls to low combustion settings.

This will gradually blacken the glass but it will clear when

operated at a high temperature for a short period.

USER INSTRUCTIONS

Use smokeless fuel or small, thick logs.

9. OVER-FIRING

9.1 Do not over-fill with fuel or run at high temperatures for

long periods or over-firing can occur. If the flue pipe, flue

collar or top plate glow red the appliance is over-firing.

Close the air controls to reduce the temperature.

9.2 Over-firing can cause permanent damage to the

appliance.

10. CHIMNEY FIRE

10.1 If a chimney fire occurs:

Shut all air controls immediately.

Evacuate the building.

Call the fire brigade.

Do not re-enter the building until it is confirmed safe.

10.2 Do not use the appliance after a chimney fire until:

a) It has been inspected by a registered installer*,

confirming the appliance is safe to use.

b) The chimney system has been inspected and swept by a

chimney sweep, confirming the system is structurally sound

and free from obstruction**.

c) It is repaired as required before re-use. Use only

genuine Stovax replacement parts to keep your appliance

in safe, efficient working order.

11. GENERAL CLEANING

11.1 Clean and inspect the appliance regularly, especially in

periods of heavy use. Regular cleaning and maintenance

will help give many years of safe use.

Allow appliance to cool thoroughly to avoid risk of burns.

Clean regularly, according to level of use.

Remove the ash completely (see User Instructions,

Section 7).

Check the internal components for damage. Do not use

the appliance if any parts are broken or damaged. Replace

damaged parts with genuine Stovax replacement parts to

keep the appliance in safe, efficient working order.

In the U.K.

* Registered on the Competent Persons Scheme (GB only)

see page 27 / INFO (Republic of Ireland).

** This should be done by a HETAS registered chimney

sweep, see page 27, who will issue you with a certificate.

This manual is related to the following products: