Yamaha PORTATONE PSR-OR700 User Manual
Page 86
Using, Creating and Editing
V
oices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-OR700 Owner’s Manual
86
FILTER
TUNE
EFFECT
EQ (Equalizer)
HARMONIC CONTENT
Allows you to adjust the resonance effect (page 94) for each part.
BRIGHTNESS
Determines the brightness of the sound for each part by adjusting
the cutoff frequency (page 94).
PORTAMENTO TIME
Portamento is a function that creates a smooth transition in pitch
from the first note played on the keyboard to the next. The
Portamento Time determines the pitch transition time. Higher
values result in a longer pitch change time. Setting this to “0”
results in no effect. This parameter is available when the selected
keyboard part is set to Mono (page 93).
PITCH BEND RANGE
Determines the range of the PITCH BEND in semitones for each
keyboard part (when a pedal is assigned to this function).
OCTAVE
Determines the range of the pitch change in octaves for each
keyboard part.
TUNING
Determines the pitch of each keyboard part.
TRANSPOSE
Allows you to set the transposition for the keyboard pitch (KEY-
BOARD), Song playback (SONG), or overall sound of the instru-
ment (MASTER), respectively.
TYPE
Select the desired effect type (page 88). After editing various
parameters for the selected effect type, you can save it as an orig-
inal effect.
REVERB
Adjusts the amount of the Reverb sound for each part or chan-
nel.
CHORUS
Adjusts the amount of the Chorus sound for each part or chan-
nel.
DSP
Adjusts the amount of the DSP sound for each part or channel.
TYPE
Select the desired EQ type to suit the type of music and the per-
formance environment (page 90). This affects the overall sound
of the instrument.
EDIT
For editing the EQ (page 91).
EQ HIGH
Determines the center frequency of the high EQ band that is
attenuated/boosted for each part.
EQ LOW
Determines the center frequency of the low EQ band that is
attenuated/boosted for each part.