Yamaha PLG150-VL - Manual (Page 32)

VL System Parameters
32
2
WX Lip Mode ............................................................Settings:Norm (Normal), Expd (Expand)
WX-series Wind MIDI Controllers produce pitch bend data ranging from “-16” to “+32” in
response to lip (reed) pressure. The “WX Lip” parameter determines whether these values are
used as is (“Norm”), or expanded to a full “-64” through “+63” range (“Expd”). The pitch bend
data transmitted from the device other than WX-series can be received.
• The “Expd” setting is recommended when using a WX controller in the “tight lip” mode. The “Norm” setting is
recommended when using the WX controller “loose lip” mode.
• The settings made here is effective only for the PLG150-VL.
3
Breath Mode ................................................................. Settings: BC/WX, Velocity, Touch EG
The same parameter, Breath Mode, can be found in the VL Part Parameters. The setting done here
is effective only when the Breath Mode in the VL Part Parameters is set to “System.”
See page 28 for the detailed information on each parameter .
-16
+32
-16
+32
0
-16
+32
-64
+63
0
Data sent to the
tone generator
When “Norm” is selected When “Expd” is selected
Received data
Received data Data sent to the
tone generator
Pitch Bend Range When Using a WX Controller in the “tight lip” Mode