Yamaha PLG150-VL - Manual (Page 15)

15
Selecting Voices
Modular Synthesis Plug-in System
■ Selecting VL Voices
When the PLG150-VL is properly installed on your synthesizer, the VL voices can be selected in the
same way as the internal voices of the synthesizer. For more information see the manual of the synthe-
sizer.
The example displays used in the following explanations are all taken from CS6x. Therefore, the illustrations may
be somewhat different from the LCDs of your instrument.
1
Press the VOICE button.
Voice mode will be displayed.
2
Press the appropriate PLG button (PLG1 or PLG2, depending on which
slot the PLG150-VL board has been installed to).
3
Then select the VL voice by pressing the appropriate BANK button and
PROGRAM button.
To select a different voice bank, simultaneously hold down the appropriate PLG button and turn knob C
(or press the INC/ DEC buttons). The bank is expressed in two numbers: MSB and LSB. If a selected
bank is not available, the bank letter indication in the display (A - H) will not change.
VCE Play) INT:001(A01)[Sq:Generation]
EQLow-G EQMid-G EQHi-G FLT-Rez EfHPF
VCE Play) PLG1:001(A01)[--:Plug-InVce]
EQLow-G EQMid-G EQHi-G ------- -------