Yamaha PLG150-VL - Manual (Page 20)

Editing VL Voice Part Parameters
20
XG Plug-in System
The editings done to the parameters below affect all the voices in the XG mode. In other words the
voices cannot be individually edited. The parameter settings are effective even when you select a dif-
ferent voice.
The edited voices cannot be stored in the INTERNAL voice bank. Instead, the VL-XG voices edited using XG Edi-
tor Window of the “XGworks lite” can be saved as a part of the song data.
1
Enter the Multi Part Edit Mode.
The sub-mode menu appears on the LCD.
2
Press SELECT button to place the cursor to PLUGIN.
3
Press ENTER.
The Part Parameter Edit display exclusive to the PLG150-VL appears.
4
Press SELECT button to select the parameter you want to edit.
5
Use VALUE button to set the value of the selected parameter as required.
6
Press the EXIT button to quit editing.
The part parameters available on the “mother” tone generator can also be applied to the VL voices
except for the following parameters: HPF Cutoff Frequency, EQ Low/High Frequency, Element Reserve
and Velocity Limit Low/High.