ZyXEL Communications ZyXEL Dimension ES-3124-4F - Manual (Page 72)

ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
72
Configuration via Web [GS-4012F]
1. At the very beginning, you can create your MVR VLAN First (which is
VLAN100). To create this multicast VLAN, we do it in another way. First,
access to the GUI of your Switch. Then click “Advanced Application” on the
left and choose “Multicast”. Finally, you should click MVR on the right frame
to setup your Multicast VLAN.
2. Give a name to this Multicast VLAN following by its VLAN ID. Active this
VLAN; Pick port 11 as the receiver port; Pick port 9 and 10 as the Source
Port. In this scenario, we need to make the source port remains the VLAN
“tag”. Thus, we come out the following setting. Click “add” to create this
VLAN. When the VLAN is set, we keep going and click “Group
Configuration” on the upper right corner to create our Multicast Groups.