ZyXEL Communications VES-1616 - Manual (Page 76)

ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation. 75
Setting , and activate the IGMP Snooping.
7. In the VES-1616FA-54, go to Advanced Application> MVR, and then to the
Group configuration
. Set 233.1.1.1~ 233.1.1.100 as the range of multicast
address so that only the clients belonging to that range of multicast group will
receive the multicast traffic.
Configuration via CLI
Step 1: On the VES-1616FA-54, in the configure mode, create VLAN 100
VES-1616FA-54# config
VES-1616FA-54(config)# vlan 100
Step 2: In the VLAN 100, set the port 17 to be fixed port.
VES-1616FA-54(config-vlan)# fixed 17
Step 3: On the VES-1616FA-54, in the configure mode, create VLAN 30, and
set the port 1 to be fixed port.
VES-1616FA-54(config)# vlan 30
VES-1616FA-54(config-vlan)# untagged 1