ZyXEL Communications VES-1616 - Manual (Page 110)

ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation. 109
2. A Map Object Properties screen displays. Enter a descriptive name in the
Label
field. Then enter the IP address of the device in the Address field. For this
example, we enter “192.168.0.1” as the IP address of the switch.
Figure 5 Map Object Properties
3. Click the Access tab to configure SNMP settings. Change the value for Read
Access Mode
to SNMP V2c.
Figure 6 Read Access mode