ZyXEL Communications P-660HW-T v2 - Manual (Page 66)

P-660HW-T v2 User’s Guide
66 Chapter 3 Wizard Setup for Internet Access
Figure 29 Manually assign a WPA-PSK key
The following table describes the labels in this screen.
3.3.2 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 30 Manually assign a WEP key
Table 15 Manually assign a WPA key
LABEL DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.