ZyXEL Communications P-660HW-T v2 - Manual (Page 221)

P-660HW-T v2 User’s Guide
Chapter 17 System 221
17.2 Time Setting
To change your ZyXEL Device’s time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device’s time
based on your local time zone.
Figure 132 System Time Setting
Admin Password If you log in with the admin password, you can configure the advanced features as
well as the wizard setup on the ZyXEL Device.
Old Password Type the default admin password (1234) or the existing password you use to access
the system for configuring advanced features.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 85 System General Setup
LABEL DESCRIPTION