ZyXEL Communications 56K - Manual (Page 51)

User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
5-13
Minimum Scan Time/Line st=0:0 ms
st=1:5 ms
st=2:10 ms (normal); 5 ms (fine)
st=3:10 ms
st=4:20 ms (normal); 10 ms (fine)
st=5:20 ms
st=6:40 ms (normal);20 ms (fine)
st=7:40 ms
+FIS=vr,br,wd,ln,df,ec,bf,st Current Session negotiating
parameters The same as above
+FCS=vr,br,wd,ln,df,ec,bf,st Current Session Parameters The same as above
+FLI=”string” Local Facsimile station ID String,
TSI/CSI
+FPI=”string” Local Facsimile station ID String,
CIG
+FLP=n Indicate Document available for
polling n=0:No document
n=1:A document is available
+FSP=n Enable/Disable polling n=0:Disable
n=1:Enable
+FNR=rpr,tpr,idr,nsr Negotiation Reporting Enable rpr= 0:Receiver parameters are not
reported.
rpr=1:Receiver parameters are
reported.
tpr= 0:Transmitter parameters are
not reported.
tpr=1:Transmitter parameters are
reported.
idr= 0: ID Strings are not reported.
idr=1: ID Strings are reported.
nsr= 0:Non-standard frames are
not reported.
nsr= 1:Non-standard frames are
reported.
+FIE=n Procedure Interrupt parameter n=0:Disable
n=1:Enable
+FPS=n Page Transfer Status n=1:Received page is good.
n=2:Page is bad; retrain is
requested.
n=3:Page is good; retrain is
requested.
n=4:Page is bad; procedure
interrupt is requested.