ZyXEL Communications 56K - Manual (Page 50)

User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
5-12
Service Class 2.0 Commands
Command Description Value
+FDT Transmit phase C data command:
releases the DCE to proceed with
the negotiation.
+FDR Receive phase C data command:
initiates document reception.
+FKS Terminate a Session , orderly fax
abort.
+FIP Initialize Service Class 2.0
Parameters.
+FCLASS=n Service Class Identification and
Control n=0,1,2.0,8;refer to the +FCLASS
Class 1 command
+FMI? Identify DCE Manufacturer ZyXEL
+FMM? Identify DCE Omni 56K/Omni 56K Plus
+FMR? Identify DCE Revision Vx.x
Establish DCE Capabilities
Vertical Resolution vr=0:Normal;98 lpi
vr=1:Fine;196 lpi
Bit Rate br=0:2400 bps
br=1:4800 bps
br=2:7200 bps
br=3:9600 bps
br=4:12000 bps
br=5:14400 bps
Page Width wd=0:1728 pixels in 215mm
wd=1:2048 pixels in 255mm
wd=2:2432 pixels in 303mm
Page Length ln=0:A4;297mm
ln=1:B4;364mm
ln=2:unlimited length
Data Compression Format df=0:1-D
df=1:2-D
Error Correction ec=0:Disable
+FCC=vr,br,wd,ln,df,ec,bf,st
Binary File Transfer bf=0:Disable