Yamaha CLP-130 - Manual (Page 23)

CLP-130/120 Selecting & Playing Voices
ENGLISH
23
Pressing the [REVERB] button repeatedly toggles the reverb on and off.
The indicators light in sequence each time the [REVERB] button is pressed. No effect is
produced when all indicators are off.
Even if the REVERB effect is OFF, a “Soundboard Reverb” effect will be applied when
the
GRAND PIANO 1 voice is selected.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the
[–/NO] [+/YES] buttons while holding the [REVERB] but-
ton. The depth range is from 0 through 20. The current
depth setting appears on the LED display while the
[REVERB] button is held.
[EFFECT]
The [EFFECT] button allows you to select an effect to give your
sound greater depth and animation.
OFF: When no effect is selected, no EFFECT indicator is lit.
CHORUS: A shimmering, broadening effect
PHASER: Adds a sweeping effect to the sound.
TREMOLO: Tremolo effect
DELAY:
Echo effect
To select an effect type press the [EFFECT] button a few times until the indicator corre-
sponding to the desired type lights (the indicators light in sequence each time you press
the
[EFFECT] button). No effect is produced when all indicators are off.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by
using the
[–/NO] and [+/YES] buttons while holding the
[EFFECT] button.
The depth range is from 0 through 20. The current depth
setting appears on the LED display while the
[EFFECT]
button is held.
Procedure
TIP
Releasing the [REVERB] but-
ton changes the reverb type.
If you are changing the reverb
depth by holding the [REVERB]
button, pressing the [REVERB]
button will not change the
reverb type.
TIP
depth 0: no effect
depth 20: maximum reverb
depth
TIP
Default depth settings are differ-
ent for each voice.
TIP
The default effect type (includ-
ing OFF) and depth settings are
different for each voice.
Procedure
depth
TIP
Releasing the [EFFECT] button
changes the effect type.
If you are changing the depth
settings by holding the
[EFFECT] button, pressing the
[EFFECT] button will not
change the effect type.
TIP
depth 0: no effect
depth 20: maximum effect
depth
TIP
Default depth settings are differ-
ent for each voice.
depth