ZyXEL Communications 2R-P1C - Manual (Page 6)

P-2301/2R-P1C / P-2301RL-P1C User’s Guide
6
2 PHONE / PHONE 1: Use a telephone cable (and any
telephone adaptor provided with your ZyXEL Device) to
connect your telephone to this port.
3 PHONE 2 (P-2302R-P1C only): connect another
telephone to this port. If you have only one phone, use the
PHONE 1 port.
4 ETHERNET: Use an Ethernet cable to connect your
computer to this port.
5 WAN: Use an Ethernet cable to connect your broadband
modem or router to this port.
6 POWER: Use the power adaptor provided with your
ZyXEL Device to connect an appropriate power source to
this port.
On the front panel, the POWER light flashes green while your
ZyXEL Device starts up, and stays green once it is ready. The
WAN and ETHERNET lights turn on if the WAN and
ETHERNET ports are properly connected. These lights flash
when the ZyXEL Device is sending or receiving data.
4 Initial Configuration
Use a web browser on your computer to set up your ZyXEL
Device. See
Troubleshooting on page 27 if you have any
problems.
4.1 Open the Wizard Setup Screen
1 Launch your web browser.