ZyXEL Communications 2R-P1C - Manual (Page 27)

27
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
For the P-2301RL-P1, follow these directions to make phone
calls that do not use the Internet.
• If the PHONE light is off (indicating that you do not have a
VoIP account registered) just dial the phone number.
• If you set up the phone number in the Relay to PSTN section
(section 4.5 on page 23 ), just dial the phone number.
• Otherwise, first dial the prefix you set in section 4.5 on page
23 , and then dial the phone number.
5.2 Making Incoming Calls
Follow these directions to call the phone that is connected to
the ZyXEL Device.
• P-2302R-P1: Follow your VoIP provider’s instructions for
making incoming calls. The P-2302R-P1 must be on.
• P-2301RL-P1: Either follow your VoIP provider’s instructions
for making incoming calls, or just dial the phone number.
6 Troubleshooting
V
None of the lights turn on when I plug in the
ZyXEL Device.
Make sure that you are using the power adaptor provided with
the ZyXEL Device.
Check all the connections you made in section
3 on page 5 .