1 resetting the zyxel device, 2 setting up your computer’s ip address, Ons in – ZyXEL Communications 2R-P1C User Manual
Page 31: Setting up your, Computer’s ip address, On p, Setting, Up your computer’s ip address
31
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
6.1 Resetting the ZyXEL Device
This changes all the ZyXEL Device’s settings to their original
values. You have to make all of your changes again. See section
on page
for information on default settings.
"
Make a note of your settings before you reset
the ZyXEL Device.
To reset the ZyXEL Device,
1 Press the RESET button until the POWER light starts to
blink. (This usually takes ten seconds or less.)
2 Release the RESET button.
6.2 Setting Up Your Computer’s IP Address
"
Follow these instructions only if you are
following a suggestion in
This section shows you how to set up your computer to
automatically get an IP address from the ZyXEL Device.
6.2.1 Windows NT/2000/XP
1 In Windows XP, click Start > Control Panel.
In Windows 2000/NT, click Start > Settings > Control
Panel.