5 making phone calls, 1 making outgoing calls, Making phone calls – ZyXEL Communications 2R-P1C User Manual
Page 26
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
26
The ZyXEL Device automatically restarts. When the POWER
light stops blinking and stays on, follow the directions in
section
on page
to log in to the web configurator again.
However, use the Management IP Address you set up in step
3
, instead of
http://192.168.1.1
. If your computer’s IP address
is in a different subnet, follow the directions in
on page
to change your computer’s
IP address.
5 Making Phone Calls
Use the following sections to make outgoing calls (from a
phone attached to the ZyXEL Device, to another phone) and
incoming calls (from another phone, to a phone connected to
the ZyXEL Device).
5.1 Making Outgoing Calls
Follow these directions to make calls over the Internet.
• If you want to dial a SIP number that only uses numbers (for
example, “12345”), dial the number on your phone’s keypad.
You can also set up a speed-dial entry, if you want, in the
Phone Book > Speed Dial screen.
• If you want to dial a SIP number that uses letters or if you
want to make a peer-to-peer call, set up a speed-dial entry
first. Use the Phone Book > Speed Dial screen. Then, dial
the speed-dial number to make the call.
• If you want to call a PSTN phone over the Internet, follow
your VoIP provider’s instructions.