ZyXEL Communications 2R-P1C - Manual (Page 28)

P-2301/2R-P1C / P-2301RL-P1C User’s Guide
28
Make sure the power source is turned on.
If the problem continues, contact your vendor.
V
The POWER light is red.
Unplug the device, and plug it in again.
If the problem continues, contact your vendor.
V
I can open the web browser, but I cannot see
the Login screen.
Make sure your web browser meets the requirements identified
in section
2 .
Check the connection between your computer and the ZyXEL
Device. See section
3 .
Make sure your computer’s IP address is in the same subnet as
the ZyXEL Device’s IP address.
•
If your ZyXEL Device is in Router mode, let the ZyXEL
Device assign an IP address to your computer. See Setting
Up Your Computer’s IP Address on page 31 .
• If your ZyXEL Device is in Bridge mode, set up a static IP
address for your computer. For example, if you set the
Management IP Address to 192.168.5.1, set up a static IP
address in the range 192.168.5.2 ~ 192.168.5.254 on your
computer (see section 6.2 on page 31 ). When you finish, set
up the original settings again.