WiLife V 1.5 - Manual (Page 20)

Getting Started LukWerks User Guide
14
Windows Firewall Auto-Alert McAfee Auto-Alert Message
Additional Cameras
You can have up to six Luk Cameras in each LukWerks system. Adding new cameras is easy. Check our
website periodically for news regarding any new cameras being released.
S
TEP
1 – P
OSITION YOUR CAMERA
a. Select a location for your camera.
Use one of the convenient mounting options to secure your camera to a desktop, window or wall.
Note 1: If mounting the camera on a window, clean the area of the window where the suction cup will be
attached. Let the area dry completely before mounting the camera.
Note 2: The Window Mount Suction Cup has been tested and proven to hold the weight of objects heavier than
the camera for extended periods. To increase the suction power of the cup, spread a small drop of vegetable or
olive oil on the underside of the cup before applying it to the window.
b. Plug the Camera Power Supply into a nearby outlet.
Use the included Camera Cable (8 ft. standard Ethernet cable) to connect the power supply to the
camera.
Note: The Camera Power Supply has built-in surge protection and must be plugged directly into your wall outlet.
Plugging the Camera Power Supply into a surge-protected power strip may reduce the quality and performance of
the LukWerks system.
S
TEP
2 – I
DENTIFY THE
N
EW
C
AMERA IN
W
ERKS
There are two choices of setup paths – a and b. So, read both before moving on with the procedure:
a. You did NOT set a custom password
If you have NOT set a custom camera password, then you do not need to do anything more. Werks will
automatically recognize the camera within 1-2 minutes.