WiLife V 1.5 - Manual (Page 101)

Regulatory and Safety LükWerks User Guide
95
If your HomePlug®/USB Bridge is unable to connect to a Luk Camera, or if camera performance is
unsatisfactory, try moving the camera’s power supply module to a different electrical outlet.
If you suspect non-LukWerks equipment may be interfering with the operation of the LukWerks system (i.e. the
LukWerks system only operates when the other equipment is turned off) placing a low-pass power line filter
between the AC line and the non-LukWerks equipment may resolve the problem.
To protect your privacy, be sure to set a unique password via the LukWerks software. Doing this encrypts your
camera data and makes the output unreadable by neighboring HomePlug® systems which may be able to
detect your signals.