weber FT 600 - Manual (Page 13)

(a)
Fuel scale
decal on
front side
Top frame rail
assembly
Cut out
View from
the back
Front
caster
frame
Front wheel
frame
Position the top frame rail assembly with the tabs to the
inside of the cart. Figure 7 (a).
Insert the tabs into the front caster frame and front
wheel frame, the round tubing of the top frame rail
assembly will rest in the cut out portion of the caster
frame and wheel frame.
Step 7
Assemble back top frame rail
You will need: one top frame rail #1,
one top frame rail #2, one 1/4-20 x 1/2 inch bolt, frame
assembly and 7/16 inch or adjustable wrench.
Put top frame rail #1 to your left and top frame rail #2 to
your right. Insert top frame rail #1 into top frame rail #2.
Figure 8 (a).
Insert the bolt. Figure 8 (b). Tighten bolt with a
7/16 inch or adjustable wrench. (If you try to insert a
bolt and there are no holes, you have top frame rail #2
turned the wrong way. Turn top frame rail #2 around.)
Note: Do not use a washer for this step.
13
Figure 7
Figure 8
(a)
(b)
2
1